This guide will teaches you how to reset Bitmain Antminer S17 Series miners to factory settings.
There are three ways to reset to factory settings:
Table of Contents
1. Restore via “Reset” Button
This method can be applied within 10 minutes when the miner boots.
After powering on the miner for 2 minutes, please press “Reset” button for 5 seconds, then release it. The miner will be restored factory settings within 4 minutes and automatically restart (no need to power off the miner).
Note*: The reset is only valid if the mining machine is powered on for 2 minutes to 10 minutes, beyond 10 minutes, it cannot be recovered.
2. Restore Via Web Side
Bitmain Antminer S17 series recovery methods
Log in to your miner user interface, click “Upgrade” > >”Perform reset”, then click “OK” on the pop up window.
