The instruction manual demonstrates how to test the power supply of Antminer S17 Series with a multimeter to see if it functions or not.
The power supplies in the APW series are all covered by this article.
Read more: Bitmain Antminer S17 series Can’t Be Powered On (Non-Integrated Miner)
Please follow the steps below to test whether the Antminer S17 series power supply is damaged:
1. Make sure the power cord is plugged in correctly;
2. Set the fluke 15b+ multimeter to D/C to check the D/C voltage of the power supply;
3. There are two ways to insert the probe:
- Connect the yellow and black connectors with the red or black probe.
- The positive and negative terminals of the power supply should receive the red or black probe.
4. Verify the voltage reading. If it reads 12±0.5V, that means the power supply is operating normally; if it reads 0V, that indicates there is a problem with the power supply that needs to be fixed.
Or, you can purchase a brand-new power supply from this store to swap out the broken one.
Please contact us for additional help if you are still unable to solve this problem.
